top of page

Monitor Receiver WCR4

Wireless Calling System Monitor WCR4

Summary

The receiver monitor is equipped with advanced RF wireless and learning code technology, advanced industrial micro processor and high-sensitivity superheterodyne receiving technology which makes the product very stable.

 

Wireless calling systems are designed to improve communication in places such as restaurants, hotels, cafes and more.

Features

  • Adopt the latest industrial stable chipset.

  • Independent storage avoiding data lost

  • Super error correction

  • Address data only avoiding repeat

  • Restore the factory default function

  • High receiving sensitivity

  • Portable to move

Technical data

  • Working frequency: 433.92MHz

  • Working voltage: DC12V

  • Appearance size : 260*180*70mm

Settings manual

Press the “SET” button to enter the setting menu. Then press the “UP/DOWN” button to select the menu from “--1" to “-11". And press the “SET” button to enter the submenu.

​

(1) FN-1: Pairing
Press the [SET] button to enter the "--1" submenu. The screen will display "001", then press "UP/DOWN" to select the call base number.


A) General mode
Press the [UP/DOWN] key, select a number, for example “001”, then press any key
On the transmitter, the speaker will sound "pairing successful" and the display screen switches to the next number "002" automatically. Then you can continue to do the next pairing up to 999.

 


B) Area mode
In area mode, first digit of three is area, it can indicate “A/b/C/d/E/F” area, last two digits means numbers from 01 to 99 in one area, press [SET] key to select area "A/b/C/d/E/F" and press the [UP/DOWN] key to select  number.

​

Note : to select area mode, please select menu to "-10" to set working mode settings, such as general mode or area mode.


C) Keypads
In Keymode settings, select "005", it is special for keypad mode.
Then select to setting pairing  "--1", the screen displays "001", then press any key on the keypad,


The receiver will sound "pairing successful " and the display will change to
"002". That means all 999 codes are assigned to the receiver.


Note: the recipient can pair up to 3 keypads.

​

(2) FN-2: Pairing manager controllers
Press the [SET] button to enter the "--2" submenu. The screen will show "001", then press any button on the manager remote controller, the receiver will sound "pairing successful" and the display will change to "002". That means the pairing is complete.

.
Note: the receiver can pair up to 3 manager controllers.


(3) FN-3:Delete Manager controllers
Press the [SET] button to enter the "--3" submenu. The screen will display "001", press the [UP/DOWN] key. to select which remote to delete, then press the [DEL] key to delete. The receiver will sound "Dingdong" which means deletion is complete.


(4) FN-4:Delete call buttons
Press the [SET] button to enter the "--4" submenu. The screen will display "001", then press [UP/DOWN] to select the number to delete, then press [DEL] key to clear the call button, the receiver will sound "Dingdong".

(5) FN-5:Voice mode settings

Press the [SET] button to enter the "--5" submenu. The screen will display "001", then press [UP/DOWN] to
select voice prompt mode.


001: No. xx call
002: Floor xx calls
003: No. xx come in
004: No. xx treat
005: No. xx take food
006: No. xx get food
007: Dingdong


(6) FN-6:Keymode settings
Press the [SET] key to enter the "--6" submenu. The screen will show "5", then press "UP/DOWN" to
select button mode.


002: 2-button mode, which is suitable for 1/2-button call transmitters.
004: 4 buttons mode, which is suitable for 1/3/4/5/6 buttons call transmitter.
005: keypad mode


(7) FN-7:Display cycle time settings
Press the [SET] button to enter the "--7" submenu. The screen will display "000", then press [UP/DOWN] to
adjust the display cycle time from “001" to “999" seconds. "000" means no cycle.
This function is when there are multiple call records, they will display the cycle one by one
automatically.


(8) FN-8:Auto clear time setting
Press the [SET] button to enter the "--8" submenu. The screen will display "040", then press [UP/DOWN] to
adjust auto-delete time from “001" to “999" seconds. “000" means no auto-delete function.
This function is when there is a call notification on the screen, after some time, the notification will appear
deleted automatically.


(9) FN-9:Volume
Press the [SET] button to enter the "--9" submenu. The screen will display "15", then press [UP/DOWN] to
adjust volume from "01" to "15" different level. 


(10)FN10:Working mode settings
Press the [SET] button to enter the “-10” submenu. The screen will display "000", then press [UP/DOWN]
to select work mode.
000: Mode  999
001: A/b/C/d/E/F area mode + 99

002 : Mode 99+b/C

​

(11) FN11:Restore factory defaults
Press the [SET] button to enter the “-11” submenu. The screen will display "ALL", then press [SET] to
default factory settings.

 

(12) FN12:Sub orders

​

(12) FN13:time setting

press "UP/DOWN" to set the year. After that press the "SET" button to enter the month settings. At the same time, set the day/hour/minute/week parameter.

bottom of page