Wireless Calling System New Watch

Operating Instructions

​

I. Powering On, Powering Off, Waking Up, Confirming Calls & Deleting.

1. In the off state, **long press the “B” button** to turn on the device.

2. In standby mode, **long press the “B” button** to turn off the device.

3. In sleep mode, short press any key or when the device receives a new call message, the screen will light up and enter working mode.

4. In working mode, short press **any key** to confirm and delete received calls.

**Special Warning:**

When charging in the off state, the screen will display a flashing battery icon.

 

Charging Instructions**

Use the dedicated charging clip for charging. The device will be fully charged in **4 hours**.

​

Setting Operation**

​

1. In standby mode, **long press the "A"** button to enter setting mode.

​

2. Short press the "A"** or "B"** button to switch and select between various setting functions.

​

3. **long press the "A"** button to enter and operate the currently selected setting function.

​

4. **long press the "B"** button to exit the current function setting and save the setting data. ## **

​

​​

Pairing

​

​
1. In standby mode, **press and hold the "A"** button to enter setting mode. Short press the "A"** or "B"** button to switch to the "Pairing"** menu.

​

2. **Press and hold the "A"** button to enter the pairing interface. The bottom of the screen will display the pairing sequence number and pairing status (e.g., **“0001 NO”**).

3. After entering, briefly press the "B" button to move the cursor, and briefly press the "A" button to adjust the digits of the number.

4. After the number you wish to register is set, press the call button (pager) once. The main unit will vibrate, and the number status will change from "NO" to "OK." This indicates that the pairing of the additional unit is complete.

5. After the number registration is complete, press and hold the "B" button twice to return to standby mode.

Special Note: Up to 256 numbers can be registered.

 

Deleting Registered Numbers

 

1. In standby mode, press and hold the "A" button to enter setup mode. Briefly press the "A" or "B" button to switch to the "Pairing" menu.

2. Press and hold the "A" button to enter the pairing interface. Press the "B" button successively to select the registered number you wish to delete.

3. After selecting a number, press and hold the "A" button to delete it. Once the deletion process is complete, the screen will display the current registration status of the number.

4. Press and hold the "B" button twice to return to standby.

 

 

Deleting Call Numbers

​

When the screen displays the dialed number in loop mode (loop interval of 2 seconds, maximum 10 dialed numbers),

1. Long press any key to delete all dialed numbers and return to standby. This function allows you to delete the entire call history with one button.

​

2. Short press any key to delete the number currently displayed on the screen. This function can also be used to delete individual call messages.

​

​

Clock Settings

1. Time Settings

 

1. In standby mode, long press the "A" key to enter the settings mode. Short press the "A" or "B" key to switch to the "Clock Settings" menu.

2. Long press the "A" key to enter the clock settings interface. Short press the "B" key to select "Time"

 

3. Long press the "A" key until the hour and minute appear on the screen, for example: 13:12.

 

4. Short press the "B" key to adjust the hour and minute, then press the "A" key to confirm the changes.

 

⑤ After the time adjustment is complete, **long press the "B" button 3 times in succession** to return to the standby display. >
**※ Note: ** If the battery is completely discharged, the clock time will reset to zero. You will need to reset it after charging the device. > ### **

 

2. Automatic On/Off Schedule (Timer)**

① In standby mode, **long press the "A" button** to enter the setting mode. Short press… (text truncated in the image). (Continued from point VII, part 2) …Short press the "A" or "B" button to switch to "Clock Settings"**

② **Long press the "A" button** to enter the "Clock Settings" interface. Short press the "B" button** to select "Timed Power On/Off"**

③ **Long press the "A" button** until the hour and minute appear on the display (e.g., 13:12).

⑤ Short press the **”B”** button to adjust the status (On/Off) and the hour and minute, then press the **”A”** button to confirm the changes.

⑥ Once finished, **long press the “B” button 3 times consecutively.

​​

Deleting Calls

When the screen displays a call in loop mode (2-second loop interval, maximum 10 dialed numbers).

1. Long press "any key" to delete all previously called numbers and return to standby mode. This clears the entire call history with one keystroke.

2. Short press "any key" to delete the number currently displayed on the screen. This clears call logs one by one.

Clock Settings

 

1. Time Settings

 

1. In standby mode, long press the "A" key to enter the settings mode. Short press the "A" or "B" key to switch to the "Clock Settings" menu.

2. Long press the "A" key to enter the clock settings interface. Short press the “B” button to select “Time”

③ Long press the “A” button until the hour and minute display appears, for example: 13:12.

④ Short press the “B” button to adjust the hour and minute, then press the “A” button to confirm the change.

⑤ After the time adjustment is complete, long press the “B” button 3 times in a row to return to the standby display.

※ Note: If the battery is completely discharged, the clock will reset to zero. You will need to reset it after charging the device.

2. Automatic On/Off Schedule (Timer)

① In standby mode, long press the “A” button to enter the setting mode. Short press… (text truncated in the image). (Continued from point VII, part 2) …Shortly press the “A” or “B” button to switch to “Clock Settings”

2. Long press the “A” button to enter the “Clock Settings” interface. Short press the “B” button to select “Timed Power On/Off”

3. Long press the “A” button until the hour and minute appear on the screen (e.g., 13:12).

4. Short press the “B” button to adjust the On/Off status and hour and minute, then press the “A” button to confirm the changes.

5. Once finished, long press the “B” button 3 times in a row to return to standby mode.

Notification Settings (Prompt Settings)

1. Vibration Duration (Vibration Time)

① In standby mode, long press the “A” button to enter settings mode. Short press the “A” or “B” button to switch to the “Prompt Settings” menu.

2. Long press the “A” button to enter “Prompt Settings.” Short press the “B” button to select “Vibration Time.”

3. Long press the “A” button to enter the “Vibration Time” interface until a number between 1 and 15 appears on the screen. Press the “B” button to move the cursor, and press the “A” button to adjust the number. (The numbers 1-15 indicate vibration durations ranging from 1 to 15 seconds.)

4. When finished, long press the “B” button 3 times in a row to return to standby mode.

2. Display Time

5. In standby mode, long press the “A” button to enter setting mode. Short press the “A” or “B” button to switch to the “Prompt Settings” menu.

2. Long press the “A” button to enter “Prompt Settings.” Short press the “B” button to select “Display Time.” (Continued from point VIII, part 2 – Display Duration)

3. Long press the “A” button to enter the “Display Time” interface until a number between 1 and 60 appears on the screen (if set to “00,” the information will be displayed continuously and will not be automatically cleared). Press the “B” button to move the cursor, and press the “A” button to adjust the number. (The numbers 1-60 indicate the display duration, from 1 to 60 seconds).

4. When finished, long press the “B” button 3 times in succession to return to standby. > **※ Special Note:** The call message storage duration is the total of the vibration duration plus the display duration. >

Mode Selection

​

1. In standby mode, **long press the "A" button** to enter the setting mode. Short press the "A" or "B" button to switch to "Mode Selection"**.

​

2. **Long press the "A" button** to enter the mode selection interface. Short press the "A" or "B" button** to select the desired mode. 3. When finished, **long press the "B" button three times in a row to return to the standby display. > **※ Special Note:** There are modes for factories, banks, or employers (one call to multiple recipients). Users can select the type of calls received according to their needs. For more details, please see the Button Settings section. >

​

Button Settings

​

1. In standby mode, long-press the "A" button to enter the settings mode. Short-press the "A" or "B" button to switch to the "Button Settings" menu.

2. Long-press the "A" button to enter the "Button Settings" interface. The screen will display the button type, button value, and a selection box.

3. Short-press the "A" or "B" button to select, then press the button on the pager whose button type you want to change. If the serial number on the right changes to the value of the button, the button definition has been successfully set.

4. In "one-to-many" mode, long-press the "A" button to select or cancel the reception type.

5. When finished, press and hold the "B" button twice to return to the standby display. >

​

**※ Special Note:** One button can only be assigned to one type. If a type does not have a defined button value, the button value will be displayed as **”FF”**. If the pager can pair but cannot make calls, you will need to register the button this way. >

 

 

Language Settings

​

1. In standby mode, **long press the “A” button** to enter the setting mode. Short press the **”A”** or **”B”** button to switch to **”Language Settings”**

​

2. **Long press the “A” button** to enter the language setting interface. Short press the **”A”** or **”B”** button to switch between **”中文”** (Chinese) and **”English”** (English).

​

3. When finished, **long press the “B” button 3 times** to return to the standby display.

​

​

 

Factory Settings

​

1. Clear Pairing**

​

① In standby mode, **long press the “A” button** to enter setup mode. Short press… (text truncated). (Continued from point XII, part 1 – Clear Pairing) …Short press the **”A”** or **”B”** button to switch to the **”Factory Settings”** menu.

② **Long press the “A”** button to enter the “Factory Settings” interface. Short press the **”B”** button to select **”Clear Pairing”**

② **Long press the “A”** button until **”Clearing…”** appears on the screen.

③ Once finished, **long press the “B” button twice** until the standby display returns. The “Clear Pairing” setting is complete.

2. Restore Factory Settings

① In standby mode, **long press the “A” button** to enter setup mode. Short press the “A” or “B” button to switch to the “Restore Factory Settings” menu.

② **Long press the “A” button** to enter the “Restore Factory Settings” interface. Short press the “B” button** to select “Restore Factory Settings”

③ **Long press the “A” button** until **”Clearing…”** appears on the screen.

④ Once finished, **long press the “B” button twice** to return to standby mode. The “Restore Factory Settings” setup is complete. That's it! Those are all the instructions in the images you sent. Remember, performing a **Restore Factory Settings** will erase all your configurations and restore the device to its factory-fresh state.